google.com, pub-1613111081024165, DIRECT, f08c47fec0942fa0

Decorative Concrete Patio Resurface Lake Ozark Condo


Hey guys, it’s, Rick custom, concrete design in Lake of the Ozarks. This week. We’re over at Timberlake village. Again Doing this condo unit on the third floor, add a bunch of carpet on it that we went ahead and removed, But as you can see, what’s left behind is a lot of carpet glue.

So we’re gonna go ahead and get started by grinding all that off, get down to the bare concrete Like out here on this deck. There is one crack out there as you can see what we’re gonna go ahead and repair that, And I think there’s.

One right, here. Probably barely see it. This is a cold joint. We’re gonna go ahead and get that ground out open that back up Other than that. The concrete’s really in solid shape.. So we’re gonna get started Alright here’s, one of the cracks that we just repaired Still a little wet.

That was the last place we stopped because we had to fill some in, but right here. It was dry. So we went ahead and ground that down flush, So that is completely repaired there That one’s already been fixed and ground down it’s, another one.

We found working on this one right here, As you can see up there. It’s still not quite done. That’s, where we’ve stopped, and we still have these two more here, one here and one Right here, So we had more cracks when we thought once we remove that glue, but that’s.

Okay, easily fixable. It’s coming right along now. Okay, we got this job done over here. There’s, our flagstone pattern. All right. We’ve finished up this jab over here at Timberlake villages They ‘

Ve got the furniture back on, so we decided to shoot after the furniture is back on video on this one. Everything’s, looking good, They’ve, got it decorated up real nice filled it up Nice outside space, though, looks good.

If you guys are watching this over on YouTube. There please subscribe to my channel, so you don’t. Miss any of my Up and coming videos on my next jobs. If you liked the video hit that like button and leave me a comment, let me know what you think of this particular pattern and this job and Head on over to my site a lot more information there as well, and the link is below this video.

. So Anyways we’ll, see you guys on the next. You [ Music, ], hey guys it’s, Rick custom, concrete design in Lake of the Ozarks. This week we’re over at Timberlake village. Again doing this condo unit on the third floor, add a bunch of carpet on it that we went ahead and removed, but as you can see, what’s left behind is a lot of carpet glue.

So we’re gonna go ahead and get started by grinding all that off, get down to the bare concrete like out here on this deck. There is one crack out there, as you can see what we’re gonna go ahead and repair that, and I think there’s.

One right here, probably barely see it. This is a cold joint. We’re gonna go ahead and get that ground out open that back up other than that. The concrete’s really in solid shape. So we’re gonna get started alright here’s, one of the cracks that we just repaired still a little wet.

That was the last place we stopped because we had to fill some in, but right here it was dry. So we went ahead and ground that down flush, so that is completely repaired there that one’s already been fixed and ground down it’s, another one.

We found working on this one right here, as you can see up there. It’s still not quite done. That’s, where we’ve stopped, and we still have these two more here, one here and one right here, so we had more cracks when we thought once we remove that glue, but that’s.

Okay, easily fixable. It’s coming right along now. Okay, we got this job done over here. There’s, our flagstone pattern. All right. We’ve finished up this jab over here at Timberlake villages they ‘

Ve got the furniture back on, so we decided to shoot after the furniture is back on video on this one. Everything’s, looking good, they’ve, got it decorated up real nice filled it up nice outside space, though, looks good.

If you guys are watching this over on YouTube. There please subscribe to my channel, so you don’t. Miss any of my up and coming videos on my next jobs. If you liked the video hit that like button and leave me a comment, let me know what you think of this particular pattern and this job and head on over to my site a lot more information there as well, and the link is below this video.

So anyways we ‘ Ll, see you guys on the next. You [ Applause, ],

Please subscribe to My YouTube Channel and uh like the video. If you like it, leave me a comment. Let me know what you think and hit that little bell, so you stay subscribed to my videos. Uh links are below to my facebook page and my website, where you can get more information.

All right see you guys on the next one.

Hope you Enjoy the pictures and Video
MORE pictures located HERE!!

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting My Website, come back again soon….

Rick LaFata
(573)-216-0930
rick@customconcretedesign.info
Custom Concrete Design

 

 

 

 

 

 

 

Source : Youtube

Decorative Concrete Metallic Epoxy Sample Boards Base Coat

Hey guys, it’s right here today. What I’m gonna do is just put a black base coat on these boards. These are three simple words. I’m, getting ready to do for clients. I just said: go ahead and pour this, so this is our black base.

Normally, we always use this for our base. Go to our floors too, so that’s. What I’m gonna use on boards, so I’m gonna go ahead and premix our part, a I’ve got it over here, makes our part be up. Then I’m gonna mix.

The two together, along with the metallics and we’re, going to spread this on with a squeegee. We’re gonna be using about nine ounces, because I got about hardly nothing here. So nine ounces should cover this, probably a little bit more than what we need but use you, okay.

What I’ve done is I’ve, just mixed a part, A Part B at a two-to-one ratio. My metallics are in there and I mixed it for three minutes. So now I’m gonna go ahead and pour it out as equal as I can spread it around with our squeegee and then use a chip brush around the edges.

That’s. Basically it for today that’ll, be our base coat. We’ll, let it sit and we’ll come back tomorrow, you, okay, guys. The base goes on not much more. We can do. We’ll, just kind of let this move around a little bit and do its thing.

It won’t move a whole lot because put it on fairly thin. Put it a little bit thicker, but it’s, not super thin, so a little bit of movement. But finally, it’s on we’re gonna. Let it sit dry overnight and I’ll be back.

Take you to my Facebook page. You can check that out and also take you to my website. Entryways. Looking good [ Music ] see you guys on the next project:

Please subscribe to My YouTube Channel and uh like the video. If you like it, leave me a comment. Let me know what you think and hit that little bell, so you stay subscribed to my videos. Uh links are below to my facebook page and my website, where you can get more information.

All right see you guys on the next one.

Hope you Enjoy the pictures and Video
MORE pictures located HERE!!

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting My Website, come back again soon….

Rick LaFata
(573)-216-0930
rick@customconcretedesign.info
Custom Concrete Design

 

 

Decorative Concrete Tuscan Slate Brick Boarder Antique Taupe Patio Custom Concrete Lake Ozark

Hey this is Rick with custom concrete design at Lake of the Ozarks. This week we are in Westphalia Missouri. We’re, going to be doing this patio right here. It’s about a thousand square feet wraps around the other side of the house over there, but we’re just going to come to this cold joint.

We’re, going to stay to the left side of it. We’ve already started doing the grinding. As you tell there, you can probably see a lot of the white drain marks where we’ve been, but those those are where the cracks are.

How will you guys can see this on a video or not? It’s kind of hard for me to tell exactly where it’s at till the Sun and shadows here, but there’s, some repairs that have to be done right here along this cold joint there’s another pretty good-sized crack right here on the corner.

It’s, not long, but it’s kind of wide. This is probably the worst one that we’ve got this just wraps on around where there’s a couple more cracks over here. You business owners pinning him between a desk and a vehicle show.

This job here in Westphalia Missouri, is now complete. We’ve got our brick borders everywhere, camouflaged our joint lines, Tuscan slate texture, finish: colors are taupe a little bit darker on the base coat a bit lighter on the topcoat.

Then we sprayed it with some antiquing stain same color, taupe spray, the border. All the brick, I should say, sprayed it through our hopper gun and we hand painted quite a few bricks, while we have various colors shine on it, a little bit closer view here.

Take you to my Facebook page. You can check that out and also take you to my website. Entryways. Looking good [ Music ] see you guys on the next project:

Please subscribe to My YouTube Channel and uh like the video. If you like it, leave me a comment. Let me know what you think and hit that little bell, so you stay subscribed to my videos. Uh links are below to my facebook page and my website, where you can get more information.

All right see you guys on the next one.

Hope you Enjoy the pictures and Video
MORE pictures located HERE!!

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting My Website, come back again soon….

Rick LaFata
(573)-216-0930
rick@customconcretedesign.info
Custom Concrete Design

 

 

Decorative Concrete Condo Deck Tuscan Slate Texture Brown Antique Stain | Lake of the Ozarks MO

Okay this week we are in Greenview Missouri by the hurricane deck and Lake of the Ozarks MO, today were gonna start on a condo deck luckily for us its on the ground level and will be on the backside of the complex working on this screened in patio concrete has a few cracks nothing major the complex itself is fairly new so we have some great concrete to work with and another nice view of the lake.

So first step with this concrete is to prep it up meaning open up the cracks grind the surface which opens up the pores of the concrete to get it ready for our overlay. Once the cracks are opened up I’ll go ahead and fill them and then grind them down flush with the rest of the concrete, now the cracks are filled and ground down were just gonna go ahead and grind the rest of it cleaned it up the best we can with a shop vac and then pressure wash it.

The next step is putting down the base coat we are going with a dark chocolate color as our base, that goes down pretty quick so we went ahead and put down a second base coat.

Now were ready for our top coat which is can be a Tuscan Slate texture which will now give this concrete some depth and will create a nice design for the stains in the next step.

Right now we have to prep off the screen and the inside walls with paper, mix up our antique stain pour it into our pump up sprayer and spray this out randomly most likely I will need 2 maybe 3 coats I would say the third coat will be more of a highlight coat where I just kind of spray here and there to get the marbleization that I’m looking for.

Once I have the antique stain applied and the marbleization that I’m looking for I’ll let it dry and move on to the next step will be the next day and will come in and remove the paper get it cleaned up and ready for sealer, so I always come in and put two coats a sealer on the next day this allows the antique stain to fully dry and just give me that look them after. The first coat of sealer usually gets absorbed very quickly, however the second coat is what I like to call the money coat and it really allows the color to pop and gives it a great shine.

I would say that this Brown antique stain along with our Tuscan Slate has to be one of our more popular floors that we do our client was extremely happy with it and it brought in several more bids from those that live in that condo complex, enjoy the video on this post and the rest of the videos on my page under the video gallery tab be sure and check out the picture gallery as well and all the other information on this website.

Hope you Enjoy the pictures and Video
MORE pictures located HERE!!

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting my Website, come back again soon….

Rick LaFata
(573)-216-0930
rick@customconcretedesign.info
Custom Concrete Design

Decorative Concrete Overlay Coating Knockdown Finish on a Pool Deck | Lake Ozark, MO

On this pool decks we started our day by trimming back bushes grinding the walkway and grinding off the concrete overlay on the pool deck.

Once the concrete overlay was completely removed from the pool deck itself we had several cracks that needed repaired so we ground them out and filled them in. We also had one area that was a hole the size of a baseball so we cleaned it out and continued with our repair.

All the grinding and repairs were done we were finally ready to start our overlay on the entire surface started at the far end of the pool and just worked our way back with our base coat, once it was dry we came back through with a second base coat.

Now we have a fresh clean repaired concrete surface to work with, we measured everything out 4 x 4 squares set on a 45° pitch with a 5 inch border around each square and around the pool itself and we measured out a 10 inch border for the outside perimeter of the pool deck, once we had all our measurements done and had our marks down we continued with our fiber tape to lay down the pattern.

Once the pattern was down it was time for more colored concrete, I decided to do the all the borders first so that meant we had to paper off the 4 x 4 squares from any concrete overspray. Now the borders are sprayed and the only thing we could do was let everything dry overnight.

The next step was to paper off the borders so that we could spray the 4 x 4 squares the lighter color of the two colors, basically what we were trying to go for here and you can see from the pictures and the video is keeping everything overall very light with the color of the house and keeping the borders a few shades darker to set off our pattern and to also complement the trim of the house. After the squares were sprayed we pulled the paper off of our borders and then we also removed our fiber tape that separated the square and the border all of this reveals our pattern our colors and now it’s a matter of getting everything cleaned up and getting it sealed.

The whole process from start to finish took us about three weeks to complete, the reason it took a little bit longer on this project is simply because we had a lot of rain mother nature can be relentless sometimes, but the job got done it turned out great our client was very happy.

Hope you Enjoy the pictures and Video
MORE pictures located HERE!!

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting my Website, come back again soon….

Rick LaFata
(573)-216-0930
rick@customconcretedesign.info
Custom Concrete Design


 Page 1 of 12  1  2  3  4  5 » ...  Last »