google.com, pub-1613111081024165, DIRECT, f08c47fec0942fa0

Decorative Concrete Antique Acid Stained Condo Deck Lake Ozark, MO

This week we were down Horseshoe Bend in Lake of the Ozark, MO… This project was pretty simple once we got past the Epoxy that was put on the outside suspended deck, it was on there pretty good…. the grinders we used did a great Job as usual, but so did the muscle behind the grinder, we always win so this deck coating really had no chance haha

Grinding the Epoxy off we did start to see more and more cracks appear, these cracks were not repaired before the epoxy went on so most of the cracks never showed up until the Epoxy was coming off, looks like the material just filled in the area’s where cracks were present, so now the coating is off we had to open up the cracks some to remove loose material so we could fill it with our crack repair material… Awesome stuff works GREAT!!IMAG1991

Cracks are repaired now it was time to start the overlay, we laid out our base coat of charcoal colorant, it looked great, the next day we came back and started taping the pattern, on this one we hand taped a Ashler slate type pattern, once we got the look we wanted we had to prep up the walls and railing from any over spray of concrete material, next was what we call the tack coat…its a layer that goes over the fiber tape to help keep the top coat from bleeding under the fiber tape, we do NOT want that to happen. ok Tack coat is sprayed on… time to go home for the day.

The next day we came in and started out texture coat which IS the most popular of texture coats that we do “THE TUSCAN SLATE” so we get that coat on once dry we pull the tape and clean it up… looks great!

Next step was to make sure everything is still taped up well from over spray but this time it was not going to be over spray from Concrete, now its time for the Antique Acid Stain, once I mixed it up checked to make sure everything was covered I started spraying it on with my pump up sprayer, we had to do a few coats till I got the look I was after… done let it sit and do its thing.

Looks great so now we need to pick out random squares to hand paint with sponge brushes two different colors one Slate grey Antique Acid (slight blueish tint) and a grey that was pretty standard just a medium grey… a lot of this is shown in the Video at the bottom of this page or click the Red Video Tab at the Top to watch it. So now we have all the squares colored that we want, again this was just random no real pattern, just wanted it to look kinda proportioned.

Ready for SEALER!!… we mixed up our premium sealer and laid down 2 coats with a roller, pretty simple the only thing left was to shoot the final Video and take some pictures and this Job was DONE!!

Another Concrete Surface Saved and Beautified by Custom Concrete Design!

Hope you Enjoy the pictures and Video

MORE pictures located HERE!!

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting my Website, come back again soon….

Rick LaFata
(573)-216-0930
rick@customconcretedesign.info
Custom Concrete Design

Facebook YouTube Twitter pinterest WordPress Flickr about.me Instagram

Firestation Epoxy Garage Floor Crocker MO

First off I want to thank the Crocker Fire-station for calling me about his project Last fall, this project has been a long time in the works, a lot more for them than myself, but it all came together this year and Congratulations to them the New Fire-station looks great and you guys deserve it!

We came in the first day to get all our prep work done, this was a great slab of concrete and it had a few minor cracks we had to repair and but other than that the floor was in great shape, but of course we still had to shot blast it and get it ready for the Epoxy coating that was to come.

1966885_10152520762607545_3772672863930365408_nIt took us about 2 days to get it all prepped and ready for the Epoxy but we got-er done, once we had it ready for Epoxy we mixed up our first batch and started laying it down, it took all day for just one coat…this place is HUGE about 3800sqft and it was just the 2 of us. we came back and did a second coat the next day…once again an all day deal.

 

Now that we had the 2 coats on it was time to lay out the Yellow colored Traffic Strips so we broke out the tape measures and Tape and started in at like 3am in the morning the next day, we were running a little low on sleep for this one but we got it done and we were headed home by 11am.

Another Concrete Surface Saved and Beautified by Custom Concrete Design!

Hope you Enjoy the pictures and Video

MORE pictures located HERE!!

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting my Website, come back again soon….

Rick LaFata
(573)-216-0930
rick@customconcretedesign.info
Custom Concrete Design

Facebook YouTube Twitter pinterest WordPress Flickr about.me Instagram

Garage Epoxy Floor Looks Like Granite Glass in Lake Ozark MO

Back again this week with a Garage floor makeover, the homeowner had a garage floor that was less than appealing, the epoxy coating that was previously placed started to peel, chip, scratched and marred up with tire marks… it seen better days for sure.IMAG1364

Enter Custom Concrete Design we came in took that Old Epoxy off and gave it a SUPER Nice Granite Looking Glass Shine.

Day one as always is our prep work we came in with our grinders and got rid of that ugly looking, non sticking, peeling everywhere marked up Epoxy floor, cleaned and got it back to its original concrete….now its good to go!

Once we had the entire floor profiled and cleaned we started the base coat of colored Epoxy, applied with our Magic Squeegee then back rolled it to even the Epoxy out, we had our chips ready and my spike shoes and out on the floor I went tossing Vinyl Chips like I was feeding the chickens, up in the air to see them drizzle down onto the floor like confetti!!

Next was the clean up… the next day we came in and scraped all the loose chips and removed them from the floor, by the way I always throw my chips out at a 100% coverage this insures a complete and even looking floor, never a flaw with this consistent method. ok now were ready for the Clear UV resistant Epoxy, the coloring in the chips will really pop once this clear Epoxy goes down and the floor will have the appearance of Granite Glass, so just like the base coat we squeegee the Epoxy and back roll….is this floor done??… nope not with out a Protective coat of Urethane to protect the Epoxy.

Our Client was thrilled with his New Granite Glass Floor, its a glass floor you can drive on!!

 

Another Concrete Surface Saved and Beautified by Custom Concrete Design!

Hope you Enjoy the pictures and Video

MORE pictures located HERE!!

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting my Website, come back again soon….

Rick LaFata
(573)-216-0930
rick@customconcretedesign.info
Custom Concrete Design

Facebook YouTube Twitter pinterest WordPress Flickr about.me Instagram

Concrete Overlay Coating over Aggregate Surface Lake Ozark MO

This one was a whole lotta grinding, back in the 80’s the aggregate look was in, but not in 2014!! – We started the job with 3 days of grinding the entire surface down to a manageable level, but we still needed to build it up a little.

Once the grinding was completeIMAG1287, the cracks were open and repaired it was time to pressure wash and get it cleaned up for the next steps, the concrete overlay base coat we put it down by troweling it on with a magic trowel. The verticals we sprayed through a Hopper gun.

Now that our 2 base coat’s were in place we had to put down our top coat, once that was in place all that was left was to seal it all down with our Acrylic Sealer, we did add some shark grip additive to the sealer to give it some slip resistance, other than that it was a big job, but pretty simple in procedure.

 

Another Concrete Surface Saved and Beautified by Custom Concrete Design!

Hope you Enjoy the pictures and Video

MORE pictures located HERE!!

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting my Website, come back again soon….

Rick LaFata
(573)-216-0930
rick@customconcretedesign.info
Custom Concrete Design

Facebook YouTube Twitter pinterest WordPress Flickr about.me Instagram

Bathroom Concrete Floor Makeover in Lake Ozark, MO

This week we are remodeling a Bathroom Floor, upper level.

We came in pulled the lanolin up and laid down some roofing paper, then cut wire lath to fit over the roofing paper and stapled them both down to the wood sub floor about ever inch we placed a staple, so we went through alot of staples even know the bathroom was small. 2010-06-05_2240

Next we started placing our build-able concrete material in place to cover the wire lath so we would have a solid slab of concrete to work with, once it was established after a few coats a thick 1/4 inch bottom then a skim coat over that, we were ready for some concrete texture, we did a chunky rock texture, we were going for a rustic old world kind of look st that texture really fit the bill.

Now that the texture was done it was time to prep the walls for the Acid Stain and the Antique Stain, we sprayed our Acid Stains first, diluting with water as we sprayed some, once both colors were dry we had to remove any residue left over from the acid before using our Antique Stains. We sprayed out our Antique stains and let them dry. Next was sealer, we wanted a high gloss so it was decided that a High Gloss Epoxy was the way to go, once the Epoxy was on we used a great wax to protect it and keep it scratch free.

Hope you Enjoy the pictures and Video

MORE pictures located HERE!!

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting my Website, come back again soon….

Rick LaFata
(573)-216-0930
rick@customconcretedesign.info
Custom Concrete Design

Facebook YouTube Twitter pinterest WordPress Flickr about.me Instagram

 Page 3 of 11 « 1  2  3  4  5 » ...  Last »