google.com, pub-1613111081024165, DIRECT, f08c47fec0942fa0

What this week, we’re in Lake of the Ozarks Missouri. This is Rick with Custom Concrete Design. We’re down. Horseshoe been here. We’re gonna be working on this. Well, it’s, two pillars. Just just the driveway pillars am four, but they just want the front ones done here in front of the house.

So we’re gonna. Do both of these already got everything prepped up and ready to go for some concrete, a little patchwork, but we’re gonna do a real light gray on the majority, probably 90 % of it. The other 10 % is gonna, be a little bit darker gray, just on this front facing here this little border.

So already for some concrete, you go ahead and get this stuff on. Ok, we ‘ Ve got the base coat on the two pillars here, so we are ready to go for another base coat tomorrow. I’m gonna spray. That long and then we’re gonna make that trim a little bit dark for tomorrow.

That goes around where I’ve got that taped off right there in the front a little bit darker, I’m gonna spray it on tomorrow. Okay, we just put our third base coat on our third coat of concrete.

I should say that’s, the texture coat, which is a knockdown finish, and we just finished up our third coat on the trim, so the trim is a little bit darker than the rest of it. I put our final coat texture coat on earlier today, and we just put that darker coat on there finished up about 30 minutes ago.

So we’re, just letting it dry still wet. It will lighten up some, not a lot, but it will lighten up some over here. We sprayed this one first and you can SEE WHERE THIS ONE IS lightening up already, because it looks splotchy.

You see the dark spots, you see the light spots so that light area is actually dry right now, but that will darken back down as we seal it. Tomorrow I’m going to come back and seal this thing. This will darken down a few shades too, but it’s.

You know it’s completely dry and then this will. This will actually go back to the darker shade. Once it’s sealed, but it dries quite a bit lighter so anyways, as you can tell you know this one is considerably darker over here, but they turned out pretty nice.

I’m happy with them. Okay, this job is done and put sealers on yesterday to coat the sealer and the clients put the fixtures back on top sometime this morning. I guess that’s, the big light that I was talking about, the chrome band around the perimeter on that top slab, that’s.

Why we left that you know we didn’t code, it so we just wanted to seal. It looks nice and clean now, if you guys are watching this on youtube. Please subscribe to my channel like the video. If you liked it leave me a comment, let me know what you think and we’ll, see you guys on the next job, thanks for watching.

Please subscribe to My YouTube Channel and uh like the video. If you like it, leave me a comment. Let me know what you think and hit that little bell, so you stay subscribed to my videos. Uh links are below to my facebook page and my website, where you can get more information.

All right see you guys on the next one.

Hope you Enjoy the pictures and Video
MORE pictures located HERE!!

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting My Website, come back again soon….

Rick LaFata
(573)-216-0930
rick@customconcretedesign.info
Custom Concrete Design

 

 

 

 

 

 

  

 
 
Source : Youtube

Decorative Concrete Patio Resurface Lake Ozark Condo


Hey guys, it’s, Rick custom, concrete design in Lake of the Ozarks. This week. We’re over at Timberlake village. Again Doing this condo unit on the third floor, add a bunch of carpet on it that we went ahead and removed, But as you can see, what’s left behind is a lot of carpet glue.

So we’re gonna go ahead and get started by grinding all that off, get down to the bare concrete Like out here on this deck. There is one crack out there as you can see what we’re gonna go ahead and repair that, And I think there’s.

One right, here. Probably barely see it. This is a cold joint. We’re gonna go ahead and get that ground out open that back up Other than that. The concrete’s really in solid shape.. So we’re gonna get started Alright here’s, one of the cracks that we just repaired Still a little wet.

That was the last place we stopped because we had to fill some in, but right here. It was dry. So we went ahead and ground that down flush, So that is completely repaired there That one’s already been fixed and ground down it’s, another one.

We found working on this one right here, As you can see up there. It’s still not quite done. That’s, where we’ve stopped, and we still have these two more here, one here and one Right here, So we had more cracks when we thought once we remove that glue, but that’s.

Okay, easily fixable. It’s coming right along now. Okay, we got this job done over here. There’s, our flagstone pattern. All right. We’ve finished up this jab over here at Timberlake villages They ‘

Ve got the furniture back on, so we decided to shoot after the furniture is back on video on this one. Everything’s, looking good, They’ve, got it decorated up real nice filled it up Nice outside space, though, looks good.

If you guys are watching this over on YouTube. There please subscribe to my channel, so you don’t. Miss any of my Up and coming videos on my next jobs. If you liked the video hit that like button and leave me a comment, let me know what you think of this particular pattern and this job and Head on over to my site a lot more information there as well, and the link is below this video.

. So Anyways we’ll, see you guys on the next. You [ Music, ], hey guys it’s, Rick custom, concrete design in Lake of the Ozarks. This week we’re over at Timberlake village. Again doing this condo unit on the third floor, add a bunch of carpet on it that we went ahead and removed, but as you can see, what’s left behind is a lot of carpet glue.

So we’re gonna go ahead and get started by grinding all that off, get down to the bare concrete like out here on this deck. There is one crack out there, as you can see what we’re gonna go ahead and repair that, and I think there’s.

One right here, probably barely see it. This is a cold joint. We’re gonna go ahead and get that ground out open that back up other than that. The concrete’s really in solid shape. So we’re gonna get started alright here’s, one of the cracks that we just repaired still a little wet.

That was the last place we stopped because we had to fill some in, but right here it was dry. So we went ahead and ground that down flush, so that is completely repaired there that one’s already been fixed and ground down it’s, another one.

We found working on this one right here, as you can see up there. It’s still not quite done. That’s, where we’ve stopped, and we still have these two more here, one here and one right here, so we had more cracks when we thought once we remove that glue, but that’s.

Okay, easily fixable. It’s coming right along now. Okay, we got this job done over here. There’s, our flagstone pattern. All right. We’ve finished up this jab over here at Timberlake villages they ‘

Ve got the furniture back on, so we decided to shoot after the furniture is back on video on this one. Everything’s, looking good, they’ve, got it decorated up real nice filled it up nice outside space, though, looks good.

If you guys are watching this over on YouTube. There please subscribe to my channel, so you don’t. Miss any of my up and coming videos on my next jobs. If you liked the video hit that like button and leave me a comment, let me know what you think of this particular pattern and this job and head on over to my site a lot more information there as well, and the link is below this video.

So anyways we ‘ Ll, see you guys on the next. You [ Applause, ],

Please subscribe to My YouTube Channel and uh like the video. If you like it, leave me a comment. Let me know what you think and hit that little bell, so you stay subscribed to my videos. Uh links are below to my facebook page and my website, where you can get more information.

All right see you guys on the next one.

Hope you Enjoy the pictures and Video
MORE pictures located HERE!!

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting My Website, come back again soon….

Rick LaFata
(573)-216-0930
rick@customconcretedesign.info
Custom Concrete Design

 

 

 

 

 

 

 

Source : Youtube

Garage Epoxy Vinyl Chips Decorative Concrete Flooring Lake of the Ozarks (2018)


Hey this is Rick with custom, concrete design in Lake of the Ozarks Missouri. This week we’re over here in Four Seasons off Horseshoe Bend and we’re gonna be ripping this epoxy off of this garage floor.

We’ve got to get it back down to the bare concrete, probably got a few cracks that we have to repair over by the closet over on the left corner. But you know, as you can tell it,’s coming up here. In spots where the, where the tires roll in and we’ve, already started the grinding over here machines ripping it up pretty good.

So we’re, going to continue that and and get this thing prepped up today and ready to go for the models epoxy. Okay, so we ‘ Ve got all the the old epoxy coat off of there ground it all down. Did our repairs it’s? All cleaned up a couple dark spots that you’re, seeing in here probably is just a tiny bit of moisture because we just got through mopping it here.

I don’t know about public. Twenty minutes ago, but it’s, all prepped up and ready to go for some tan epoxy and we’re gonna come back over that T an epoxy while it’s wet. We’re gonna toss on our vinyl chips.

They’re gonna be brown, dark, brown, black and white. So we’re gonna get started. We’ve got everything set up here. We’re ready to go. Okay, we’ve, got the chips long and it all cleaned up right.

Now we’re, mixing the epoxy and getting ready to apply it in about one minute. Okay, this job over in four seasons is done. We actually completed this yesterday, but I couldn’t, come in here and shoot any video because it was wet.

So I thought I’d come back today and if you guys are watching this on youtube, please subscribe to my channel like the video. If you liked it leave me a comment, let me know what you think ask me any questions.

I’ll, get back to you, see you guys on the next job, [ Music, ], hey! This is Rick with custom, concrete design in Lake of the Ozarks Missouri. This week we’re over here in Four Seasons off Horseshoe Bend, and we’re gonna be ripping this epoxy off of this garage floor.

We’ve got to get it back down to the bare concrete, probably got a few cracks that we have to repair over by the closet over on the left corner. But you know, as you can tell it,’s coming up here. In spots where the, where the tires roll in and we’ve, already started the grinding over here machines ripping it up pretty good.

So we’re, going to continue that and and get this thing prepped up today and ready to go for the models epoxy. Okay, so we ‘ Ve got all the the old epoxy coat off of there ground it all down. Did our repairs it’s? All cleaned up a couple dark spots that you’re, seeing in here probably is just a tiny bit of moisture because we just got through mopping it here.

I don’t know about public. Twenty minutes ago, but it’s, all prepped up and ready to go for some tan epoxy and we’re gonna come back over that T an epoxy while it’s wet. We’re gonna toss on our vinyl chips.

They’re gonna be brown, dark, brown, black and white. So we’re gonna get started. We’ve got everything set up here. We’re ready to go. Okay, we’ve, got the chips long and it all cleaned up right.

Now we’re, mixing the epoxy and getting ready to apply it in about one minute. Okay, this job over in four seasons is done. We actually completed this yesterday, but I couldn’t, come in here and shoot any video because it was wet.

So I thought I’d come back today and if you guys are watching this on youtube, please subscribe to my channel like the video. If you liked it leave me a comment, let me know what you think ask me any questions.

I’ll, get back to you, see you guys on the next job: [ Music, ],

Please subscribe to My YouTube Channel and uh like the video. If you like it, leave me a comment. Let me know what you think and hit that little bell, so you stay subscribed to my videos. Uh links are below to my facebook page and my website, where you can get more information.

All right see you guys on the next one.

Hope you Enjoy the pictures and Video
MORE pictures located HERE!!

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting My Website, come back again soon….

Rick LaFata
(573)-216-0930
rick@customconcretedesign.info
Custom Concrete Design

 

 

 

 

 

 

 

Source : Youtube

Epoxy Flooring Basement – Lake of the Ozarks Mo


Hey guys, this is Rick with custom, concrete design at Lake of the Ozarks Missouri. This week we’re in gravois mills, and we’re at this home were down in the lower-level basement. We’ve already done. All of our grinding and prepped the walls, as you can tell getting it ready for the base coat of epoxy, that’s.

Why you see these buckets of vinyl chips, that’s? The color we’re going to be doing. This is a living room area going back here to a little bedroom and closet. We’re, going to do all that. We’re, just gonna stop it right there in the entryway of that closet, and you come back and do this bathroom, of course, in this little area right here that’s, a storage area, we’re gonna Leave that alone, but we’re, getting ready to do this now so alright, I got this job over here finished up.

I’ve got well it’s, not technically it’s, not completely finished. We’ve got one more coat to put on here that’s. Why we see these rollers here, but as soon as we put that second coat on sealer, we’re gonna be out of here, but it does have one coat on that we put on last night when coat of urethane.

So we’ve got a little bit of shine, as you can see. Go on the other thing gives it more of a satin finish. So it’s. Not a real high gloss like the epoxy is, but it ‘ Ll have a little bit more shine in this once we do the second coat, but again this is just with one coat, so we’re about to wrap this up.

If you guys see this on youtube, please subscribe to my channel, see more of my videos in the future hit that like button. If you liked the video leave me a comment, let me know what you think of the job and we ‘

Ll see you guys on the next one: okay, we’ve got the second coat down and it is fresh freshly put down. So I can’t walk out there on it. So I’m gonna give you guys a reach-in view here, as you can tell you know it’s.

It’s evened up quite a bit as far as our shine goes. It’s. Got a nice nice shine to it, not high-gloss like epoxy, but still got a nice shine to it: [, Music, ], hey guys! This is Rick with custom, concrete design at Lake of the Ozarks Missouri.

This week we’re in gravel wood mill, and we’re at this home were down in the lower-level basement. We’ve, already done all of our grinding and prepped the walls, as you can tell getting it ready for the base coat of epoxy.

That’s. Why you see these buckets of vinyl chips, that’s? The color? We’re going to be doing. This is a living room area going back here to a little bedroom and closet. We’re, going to do all that. We’re, just gonna stop it right there in the entryway of that closet, and you come back and do this bathroom, of course, in this little area right here that’s, a storage area, we’re gonna Leave that alone, but we’re, getting ready to do this now so alright, I got this job over here finished up.

I’ve got well it’s, not technically it’s, not completely finished. We’ve got one more coat to put on here that’s. Why we see these rollers here, but as soon as we put that second coat on sealer, we’re gonna be out of here, but it does have one coat on that we put on last night when coat of urethane.

So we’ve got a little bit of shine, as you can see. Go on the other thing gives it more of a satin finish. So it’s. Not a real high gloss like the epoxy is, but it ‘ Ll have a little bit more shine in this once we do the second coat, but again this is just with one coat, so we’re about to wrap this up.

If you guys see this on youtube, please subscribe to my channel, see more of my videos in the future hit that like button. If you liked the video leave me a comment, let me know what you think of the job and we ‘

Ll see you guys on the next one: okay, we’ve got the second coat down and it is fresh freshly put down. So I can’t walk out there on it. So I’m gonna give you guys a reach-in view here, as you can tell you know it’s.

It’s evened up quite a bit as far as our shine goes. It’s. Got a nice nice shine to it, not high-gloss like epoxy, but still got a nice shine to it. [, Music, ]

Please subscribe to My YouTube Channel and uh like the video. If you like it, leave me a comment. Let me know what you think and hit that little bell, so you stay subscribed to my videos. Uh links are below to my facebook page and my website, where you can get more information.

All right see you guys on the next one.

Hope you Enjoy the pictures and Video
MORE pictures located HERE!!

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting My Website, come back again soon….

Rick LaFata
(573)-216-0930
rick@customconcretedesign.info
Custom Concrete Design

 

 

 

 

 

 

 

Source : Youtube

Decorative Concrete Metallic Epoxy Sample Boards Base Coat

Hey guys, it’s right here today. What I’m gonna do is just put a black base coat on these boards. These are three simple words. I’m, getting ready to do for clients. I just said: go ahead and pour this, so this is our black base.

Normally, we always use this for our base. Go to our floors too, so that’s. What I’m gonna use on boards, so I’m gonna go ahead and premix our part, a I’ve got it over here, makes our part be up. Then I’m gonna mix.

The two together, along with the metallics and we’re, going to spread this on with a squeegee. We’re gonna be using about nine ounces, because I got about hardly nothing here. So nine ounces should cover this, probably a little bit more than what we need but use you, okay.

What I’ve done is I’ve, just mixed a part, A Part B at a two-to-one ratio. My metallics are in there and I mixed it for three minutes. So now I’m gonna go ahead and pour it out as equal as I can spread it around with our squeegee and then use a chip brush around the edges.

That’s. Basically it for today that’ll, be our base coat. We’ll, let it sit and we’ll come back tomorrow, you, okay, guys. The base goes on not much more. We can do. We’ll, just kind of let this move around a little bit and do its thing.

It won’t move a whole lot because put it on fairly thin. Put it a little bit thicker, but it’s, not super thin, so a little bit of movement. But finally, it’s on we’re gonna. Let it sit dry overnight and I’ll be back.

Take you to my Facebook page. You can check that out and also take you to my website. Entryways. Looking good [ Music ] see you guys on the next project:

Please subscribe to My YouTube Channel and uh like the video. If you like it, leave me a comment. Let me know what you think and hit that little bell, so you stay subscribed to my videos. Uh links are below to my facebook page and my website, where you can get more information.

All right see you guys on the next one.

Hope you Enjoy the pictures and Video
MORE pictures located HERE!!

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting My Website, come back again soon….

Rick LaFata
(573)-216-0930
rick@customconcretedesign.info
Custom Concrete Design

 

 

 Page 1 of 12  1  2  3  4  5 » ...  Last »