google.com, pub-1613111081024165, DIRECT, f08c47fec0942fa0

Archive for June, 2021

Concrete Resurfacing | How to Make Concrete Wood Lake Ozark MO

Okay, this is Rick with custom, concrete design Lake of the Ozarks Missouri. This week I am in Lake of the Ozarks Missouri on the bagnell, damn strip at T LaFata’s Salon. This is my wife salon and the coming weeks I’m, going to be doing the entryway and a metallic epoxy, but this week I’m just working on this little slab here.

Obviously I already started the grinding there’s, a crack. I’m gonna have to repair there. I’m gonna get the rest of this grinding run, put a base coat on and we’re gonna tape out up wood pattern, so it’s.

Gon na gonna be wood planks and we’ll stain it make it look like wood and then we’re going to seal it down alright. Well, we got the pattern down. What I did was, as I did four inch planks. Orange width and then six inch width and then just kind of staggered, the length of it, and once we had the pattern down just sprayed over a basically what I call a tack coat, what it does is it seals that tape kind of locks, everything in so You know my next coat that goes over the top of it being that it’s.

Gon na be a different color. We don’t want that color to bleed up underneath to taint the tape and get on to our dark grout. So we put a tack coat down to basically seal that tape. You can kind of see the pattern all right.

We got this project finished up here at T the FATA salon, Lake of the Ozarks. I just finished up a Facebook live video, so if you guys are, if I’m friends with you on Facebook, be sure and tune in to my live videos.

Get notifications for those live videos. That way, when I do these things, because I’ve been doing more and more of them on each job for each step, but on this particular job. You guys know what we did, because you watched the previous videos, but we did the coloring yesterday and and then seal it up yesterday afternoon really turned out nice.

So you really can make concrete look like wood there. You go six-inch planks, four inch planks. All staggered different links and then I use three different colors. I use Bart Brown and an amber, and then I used those two colors to make.

My third color really turned out nice, though it’s, got some great texture to it. Give you a little bit more of a close-up here, made some not holes nail holes if you guys are on my youtube channel, make sure you get subscribed.

So you don’t miss any of my videos hit that little like button. If you liked the video leave me a comment, if you like the work, make sure you get subscribed as well, you don’t want to miss these videos because there’s, gonna, be some pretty cool ones coming up.

If you got any questions about this, that maybe I haven’t addressed in my videos here, leave me some comments below and I’ll get back to you with a reply. I don’t, give everything away necessarily on the video cuz.

Then it just makes it too long, and I really don’t. Do any how-to videos, although I could I don’t, but I may do some of those in the future. See you guys on the next project. Oh by the way below this, video will be probably a couple links one to my facebook page, so hit that and go like that page.

If you like my work, the other one is a link to my website. You can check out all the videos and all the projects I have before-and-after photos of all of them, so go check that out it’s, WW custom, concrete design, dot info.

Of course, the links are below so just click those and we’ll, see you guys on the next project: [: Music, ], okay. This is Rick with custom, concrete design Lake of the Ozarks Missouri. This week I am in Lake of the Ozarks Missouri on the bag, damn strip at teyla, father’s so long.

This is my wife salon and the coming weeks I’m, going to be doing the entryway and a metallic epoxy, but this week I’m just working on this little slab here. Obviously I already started the grinding there’s, a crack.

I’m gonna have to repair there. I’m gonna get the rest of this grinding run, put a base coat on and we’re gonna tape out up wood pattern, so it’s. Gon na gonna be wood planks and we’ll stain it make it look like wood and then we’re going to seal it down alright.

Well, we got the pattern down. What I did was, as I did four inch planks. Orange width and then six inch width and then just kind of staggered, the length of it, and once we had the pattern down just sprayed over a basically what I call a tack coat, what it does is it seals that tape kind of locks, everything in so You know my next coat that goes over the top of it being that it’s.

Gon na be a different color. We don’t want that color to bleed up underneath to taint the tape and get on to our dark grout. So we put a tack coat down to basically seal that tape. You can kind of see the pattern all right.

We got this project finished up here at T the FATA salon, Lake of the Ozarks. I just finished up a Facebook live video, so if you guys are, if I’m friends with you on Facebook, be sure and tune in to my live videos.

Get notifications for those live videos. That way, when I do these things, because I’ve been doing more and more of them on each job for each step, but on this particular job. You guys know what we did, because you watched the previous videos, but we did the coloring yesterday and and then seal it up yesterday afternoon really turned out nice.

So you really can make concrete look like wood there. You go six-inch planks, four inch planks. All staggered different links and then I use three different colors. I use Bart Brown and an amber, and then I used those two colors to make.

My third color really turned out nice, though it’s, got some great texture to it. Give you a little bit more of a close-up here, made some not holes nail holes if you guys are on my youtube channel, make sure you get subscribed.

So you don’t miss any of my videos hit that little like button. If you liked the video leave me a comment, if you like the work, make sure you get subscribed as well, you don’t want to miss these videos because there’s, gonna, be some pretty cool ones coming up.

If you got any questions about this, that maybe I haven’t addressed in my videos here, leave me some comments below and I’ll get back to you with a reply. I don’t, give everything away necessarily on the video cuz.

Then it just makes it too long, and I really don’t. Do any how-to videos, although I could I don’t, but I may do some of those in the future. See you guys on the next project. Oh by the way below this, video will be probably a couple links one to my facebook page, so hit that and go like that page.

If you like my work, the other one is a link to my website. You can check out all the videos and all the projects I have before-and-after photos of all of them, so go check that out it’s, WW custom, concrete design, dot info.

Of course, the links are below so just click those and we’ll, see you guys on the next project

Please subscribe to My YouTube Channel and uh like the video. If you like it, leave me a comment. Let me know what you think and hit that little bell, so you stay subscribed to my videos. Uh links are below to my facebook page and my website, where you can get more information.

All right see you guys on the next one.

Hope you Enjoy the pictures and Video
MORE pictures located HERE!!

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting My Website, come back again soon….

Rick LaFata
(573)-216-0930
rick@customconcretedesign.info
Custom Concrete Design

 

 

 

 

 

 

 

Source : Youtube

Decorative Concrete Patio Resurface Lake Ozark Condo


Hey guys, it’s, Rick custom, concrete design in Lake of the Ozarks. This week. We’re over at Timberlake village. Again Doing this condo unit on the third floor, add a bunch of carpet on it that we went ahead and removed, But as you can see, what’s left behind is a lot of carpet glue.

So we’re gonna go ahead and get started by grinding all that off, get down to the bare concrete Like out here on this deck. There is one crack out there as you can see what we’re gonna go ahead and repair that, And I think there’s.

One right, here. Probably barely see it. This is a cold joint. We’re gonna go ahead and get that ground out open that back up Other than that. The concrete’s really in solid shape.. So we’re gonna get started Alright here’s, one of the cracks that we just repaired Still a little wet.

That was the last place we stopped because we had to fill some in, but right here. It was dry. So we went ahead and ground that down flush, So that is completely repaired there That one’s already been fixed and ground down it’s, another one.

We found working on this one right here, As you can see up there. It’s still not quite done. That’s, where we’ve stopped, and we still have these two more here, one here and one Right here, So we had more cracks when we thought once we remove that glue, but that’s.

Okay, easily fixable. It’s coming right along now. Okay, we got this job done over here. There’s, our flagstone pattern. All right. We’ve finished up this jab over here at Timberlake villages They ‘

Ve got the furniture back on, so we decided to shoot after the furniture is back on video on this one. Everything’s, looking good, They’ve, got it decorated up real nice filled it up Nice outside space, though, looks good.

If you guys are watching this over on YouTube. There please subscribe to my channel, so you don’t. Miss any of my Up and coming videos on my next jobs. If you liked the video hit that like button and leave me a comment, let me know what you think of this particular pattern and this job and Head on over to my site a lot more information there as well, and the link is below this video.

. So Anyways we’ll, see you guys on the next. You [ Music, ], hey guys it’s, Rick custom, concrete design in Lake of the Ozarks. This week we’re over at Timberlake village. Again doing this condo unit on the third floor, add a bunch of carpet on it that we went ahead and removed, but as you can see, what’s left behind is a lot of carpet glue.

So we’re gonna go ahead and get started by grinding all that off, get down to the bare concrete like out here on this deck. There is one crack out there, as you can see what we’re gonna go ahead and repair that, and I think there’s.

One right here, probably barely see it. This is a cold joint. We’re gonna go ahead and get that ground out open that back up other than that. The concrete’s really in solid shape. So we’re gonna get started alright here’s, one of the cracks that we just repaired still a little wet.

That was the last place we stopped because we had to fill some in, but right here it was dry. So we went ahead and ground that down flush, so that is completely repaired there that one’s already been fixed and ground down it’s, another one.

We found working on this one right here, as you can see up there. It’s still not quite done. That’s, where we’ve stopped, and we still have these two more here, one here and one right here, so we had more cracks when we thought once we remove that glue, but that’s.

Okay, easily fixable. It’s coming right along now. Okay, we got this job done over here. There’s, our flagstone pattern. All right. We’ve finished up this jab over here at Timberlake villages they ‘

Ve got the furniture back on, so we decided to shoot after the furniture is back on video on this one. Everything’s, looking good, they’ve, got it decorated up real nice filled it up nice outside space, though, looks good.

If you guys are watching this over on YouTube. There please subscribe to my channel, so you don’t. Miss any of my up and coming videos on my next jobs. If you liked the video hit that like button and leave me a comment, let me know what you think of this particular pattern and this job and head on over to my site a lot more information there as well, and the link is below this video.

So anyways we ‘ Ll, see you guys on the next. You [ Applause, ],

Please subscribe to My YouTube Channel and uh like the video. If you like it, leave me a comment. Let me know what you think and hit that little bell, so you stay subscribed to my videos. Uh links are below to my facebook page and my website, where you can get more information.

All right see you guys on the next one.

Hope you Enjoy the pictures and Video
MORE pictures located HERE!!

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting My Website, come back again soon….

Rick LaFata
(573)-216-0930
rick@customconcretedesign.info
Custom Concrete Design

 

 

 

 

 

 

 

Source : Youtube

Garage Epoxy Vinyl Chips Decorative Concrete Flooring Lake of the Ozarks (2018)


Hey this is Rick with custom, concrete design in Lake of the Ozarks Missouri. This week we’re over here in Four Seasons off Horseshoe Bend and we’re gonna be ripping this epoxy off of this garage floor.

We’ve got to get it back down to the bare concrete, probably got a few cracks that we have to repair over by the closet over on the left corner. But you know, as you can tell it,’s coming up here. In spots where the, where the tires roll in and we’ve, already started the grinding over here machines ripping it up pretty good.

So we’re, going to continue that and and get this thing prepped up today and ready to go for the models epoxy. Okay, so we ‘ Ve got all the the old epoxy coat off of there ground it all down. Did our repairs it’s? All cleaned up a couple dark spots that you’re, seeing in here probably is just a tiny bit of moisture because we just got through mopping it here.

I don’t know about public. Twenty minutes ago, but it’s, all prepped up and ready to go for some tan epoxy and we’re gonna come back over that T an epoxy while it’s wet. We’re gonna toss on our vinyl chips.

They’re gonna be brown, dark, brown, black and white. So we’re gonna get started. We’ve got everything set up here. We’re ready to go. Okay, we’ve, got the chips long and it all cleaned up right.

Now we’re, mixing the epoxy and getting ready to apply it in about one minute. Okay, this job over in four seasons is done. We actually completed this yesterday, but I couldn’t, come in here and shoot any video because it was wet.

So I thought I’d come back today and if you guys are watching this on youtube, please subscribe to my channel like the video. If you liked it leave me a comment, let me know what you think ask me any questions.

I’ll, get back to you, see you guys on the next job, [ Music, ], hey! This is Rick with custom, concrete design in Lake of the Ozarks Missouri. This week we’re over here in Four Seasons off Horseshoe Bend, and we’re gonna be ripping this epoxy off of this garage floor.

We’ve got to get it back down to the bare concrete, probably got a few cracks that we have to repair over by the closet over on the left corner. But you know, as you can tell it,’s coming up here. In spots where the, where the tires roll in and we’ve, already started the grinding over here machines ripping it up pretty good.

So we’re, going to continue that and and get this thing prepped up today and ready to go for the models epoxy. Okay, so we ‘ Ve got all the the old epoxy coat off of there ground it all down. Did our repairs it’s? All cleaned up a couple dark spots that you’re, seeing in here probably is just a tiny bit of moisture because we just got through mopping it here.

I don’t know about public. Twenty minutes ago, but it’s, all prepped up and ready to go for some tan epoxy and we’re gonna come back over that T an epoxy while it’s wet. We’re gonna toss on our vinyl chips.

They’re gonna be brown, dark, brown, black and white. So we’re gonna get started. We’ve got everything set up here. We’re ready to go. Okay, we’ve, got the chips long and it all cleaned up right.

Now we’re, mixing the epoxy and getting ready to apply it in about one minute. Okay, this job over in four seasons is done. We actually completed this yesterday, but I couldn’t, come in here and shoot any video because it was wet.

So I thought I’d come back today and if you guys are watching this on youtube, please subscribe to my channel like the video. If you liked it leave me a comment, let me know what you think ask me any questions.

I’ll, get back to you, see you guys on the next job: [ Music, ],

Please subscribe to My YouTube Channel and uh like the video. If you like it, leave me a comment. Let me know what you think and hit that little bell, so you stay subscribed to my videos. Uh links are below to my facebook page and my website, where you can get more information.

All right see you guys on the next one.

Hope you Enjoy the pictures and Video
MORE pictures located HERE!!

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting My Website, come back again soon….

Rick LaFata
(573)-216-0930
rick@customconcretedesign.info
Custom Concrete Design

 

 

 

 

 

 

 

Source : Youtube

Epoxy Flooring Basement – Lake of the Ozarks Mo


Hey guys, this is Rick with custom, concrete design at Lake of the Ozarks Missouri. This week we’re in gravois mills, and we’re at this home were down in the lower-level basement. We’ve already done. All of our grinding and prepped the walls, as you can tell getting it ready for the base coat of epoxy, that’s.

Why you see these buckets of vinyl chips, that’s? The color we’re going to be doing. This is a living room area going back here to a little bedroom and closet. We’re, going to do all that. We’re, just gonna stop it right there in the entryway of that closet, and you come back and do this bathroom, of course, in this little area right here that’s, a storage area, we’re gonna Leave that alone, but we’re, getting ready to do this now so alright, I got this job over here finished up.

I’ve got well it’s, not technically it’s, not completely finished. We’ve got one more coat to put on here that’s. Why we see these rollers here, but as soon as we put that second coat on sealer, we’re gonna be out of here, but it does have one coat on that we put on last night when coat of urethane.

So we’ve got a little bit of shine, as you can see. Go on the other thing gives it more of a satin finish. So it’s. Not a real high gloss like the epoxy is, but it ‘ Ll have a little bit more shine in this once we do the second coat, but again this is just with one coat, so we’re about to wrap this up.

If you guys see this on youtube, please subscribe to my channel, see more of my videos in the future hit that like button. If you liked the video leave me a comment, let me know what you think of the job and we ‘

Ll see you guys on the next one: okay, we’ve got the second coat down and it is fresh freshly put down. So I can’t walk out there on it. So I’m gonna give you guys a reach-in view here, as you can tell you know it’s.

It’s evened up quite a bit as far as our shine goes. It’s. Got a nice nice shine to it, not high-gloss like epoxy, but still got a nice shine to it: [, Music, ], hey guys! This is Rick with custom, concrete design at Lake of the Ozarks Missouri.

This week we’re in gravel wood mill, and we’re at this home were down in the lower-level basement. We’ve, already done all of our grinding and prepped the walls, as you can tell getting it ready for the base coat of epoxy.

That’s. Why you see these buckets of vinyl chips, that’s? The color? We’re going to be doing. This is a living room area going back here to a little bedroom and closet. We’re, going to do all that. We’re, just gonna stop it right there in the entryway of that closet, and you come back and do this bathroom, of course, in this little area right here that’s, a storage area, we’re gonna Leave that alone, but we’re, getting ready to do this now so alright, I got this job over here finished up.

I’ve got well it’s, not technically it’s, not completely finished. We’ve got one more coat to put on here that’s. Why we see these rollers here, but as soon as we put that second coat on sealer, we’re gonna be out of here, but it does have one coat on that we put on last night when coat of urethane.

So we’ve got a little bit of shine, as you can see. Go on the other thing gives it more of a satin finish. So it’s. Not a real high gloss like the epoxy is, but it ‘ Ll have a little bit more shine in this once we do the second coat, but again this is just with one coat, so we’re about to wrap this up.

If you guys see this on youtube, please subscribe to my channel, see more of my videos in the future hit that like button. If you liked the video leave me a comment, let me know what you think of the job and we ‘

Ll see you guys on the next one: okay, we’ve got the second coat down and it is fresh freshly put down. So I can’t walk out there on it. So I’m gonna give you guys a reach-in view here, as you can tell you know it’s.

It’s evened up quite a bit as far as our shine goes. It’s. Got a nice nice shine to it, not high-gloss like epoxy, but still got a nice shine to it. [, Music, ]

Please subscribe to My YouTube Channel and uh like the video. If you like it, leave me a comment. Let me know what you think and hit that little bell, so you stay subscribed to my videos. Uh links are below to my facebook page and my website, where you can get more information.

All right see you guys on the next one.

Hope you Enjoy the pictures and Video
MORE pictures located HERE!!

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting My Website, come back again soon….

Rick LaFata
(573)-216-0930
rick@customconcretedesign.info
Custom Concrete Design

 

 

 

 

 

 

 

Source : Youtube

Knockdown Texture – ⚠️WARNING⚠️ Don’t Try This Alone 👷Sprayed Decorative Concrete Flagstone 👷

[, Music ], hey guys it’s, Rick custom, concrete design in Lake of the Ozarks. This week we’re over at Timberlake village. Again doing this condo unit on the third floor. Add a bunch of carpet on it that we went ahead and removed, but as you can see, what’s left behind is a lot of carpet glue.

So we’re gonna go ahead and get started by grinding all that off. Get down to the bare concrete like out here on this deck, there is one crack out there, as you can see what we’re gonna go ahead and repair that, and I think there’s.

One right here probably barely see it. This is a cold joint. We’re gonna go ahead and get that ground out open that back up other than that, the concrete’s really in solid shape. So we’re gonna get started alright here’s, one of the cracks that we just repaired still a little wet.

That was the last place we stopped because we had to fill some in, but right here it was dry. So we went ahead and ground that down flush, so that is completely repaired there that one’s already been fixed and ground down it’s, another one.

We found working on this one right here, as you can see up there. It’s still not quite done. That’s, where we’ve stopped, and we still have these two more here, one here and one right here, so we had more cracks when we thought once we remove that glue, but that’s.

Okay, easily fixable. It’s coming right along now. Alright, we’ve finished up this job over here at Timberlake villages they ‘ Ve got the furniture back on, so we decided to shoot after the furniture is back on video on this one.

Everything’s, looking good, they’ve, got it decorated up real nice filled it up nice outside space, though, looks good. If you guys are watching this over on YouTube. There please subscribe to my channel, so you don’t.

Miss any of my up and coming videos on my next jobs. If you liked the video hit that like button and leave me a comment, let me know what you think of this particular pattern and this job and head on over to my site a lot more information there as well, and the link is below this video.

So anyways we’ll, see you guys on the next [ Applause, ]

Please subscribe to My YouTube Channel and uh like the video. If you like it, leave me a comment. Let me know what you think and hit that little bell, so you stay subscribed to my videos. Uh links are below to my facebook page and my website, where you can get more information.

All right see you guys on the next one.

Hope you Enjoy the pictures and Video
MORE pictures located HERE!!

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting My Website, come back again soon….

Rick LaFata
(573)-216-0930
rick@customconcretedesign.info
Custom Concrete Design

 

 

 

 

 

 

 

Source : Youtube