google.com, pub-1613111081024165, DIRECT, f08c47fec0942fa0

HIGH GLOSS Epoxy Garage Floor Vinyl Chips | Urethane TOP Coat Lake of the Ozarks, MO

Hey guys, it’s, Rick with custom concrete design and Lake of the Ozarks Missouri. This week we’re in Waynesville Missouri. We’re gonna be working on this garage floor. Floor is in good shape, but we’re gonna go ahead and shave off this top layer, get all the imperfections taken care of and wiped off of here.

Get it cleaned up and ready for some epoxy and chips it ‘ S got one crack here in the opening. I’m gonna go ahead and repair that, and then we’ll get started on the epoxy. Okay, we got this job in Waynesville.

Wrapped up, I can’t, go out there right now, because the urethane the final seal coat. Is it’s wet so breath? I’m just gonna get down this little step here and give you a decent view what I can anyways so the first day we ground it down, took off that top layer.

Patched everything up fix all our cracks put our base coat down. Second day and then through our chips on top, come back to the third day we get our pops eat, and then today we put on a couple coats of the urethane water-based.

You’re, a saint, so give you an outside view. They trim this out repaint it. We organize everything on the walls put the TV out here. I’m, not sure what else, but to make it look nice. I’m sure if you guys are watching this on youtube.

Please subscribe to my channel go to my website. The links are below my website and my facebook page. You can get a little bit more information there about the systems that I offer and everything I do there’s.

A lot more pictures there to you as well like the video. If you do like the work and leave me a comment, let me know what you think and we’ll, see you guys in the next video you.

Please subscribe to My YouTube Channel and uh like the video. If you like it, leave me a comment. Let me know what you think and hit that little bell, so you stay subscribed to my videos. Uh links are below to my facebook page and my website, where you can get more information.

All right see you guys on the next one.

Hope you Enjoy the pictures and Video
MORE pictures located HERE!!

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting My Website, come back again soon….

Rick LaFata
(573)-216-0930
rick@customconcretedesign.info
Custom Concrete Design

 

 

 

 

 

 

  

 

 

Source : Youtube

Resurfacing a Concrete Patio and Breezyway⚠️Concrete Crack Repair⚠️Lake Ozark

All right this week, we’re in Lake of the Ozarks down in Four Seasons. This is Rick with custom concrete design. This is what we’ve got here. Is this breezeway right off the driveway and garage area? We’re gonna work on this and repair that crack.

I’m, getting ready to start the grinding, so I’m all set up with that ready to go. We’re gonna hit this little patio out here. We’re gonna come in here with a couple of base, coats, Tuscan slate texture and a antique stain.

I’m gonna. Do it at a taupe color. Try to match or get as close as we can to the side. All right, this job is complete. Take you guys for the breezeway real quick, add that cracking concrete in this breezeway right about here there let’s, build it! You guys watching this video on my youtube channel.

Please subscribe to My YouTube Channel and uh like the video. If you like it, leave me a comment. Let me know what you think and hit that little bell, so you stay subscribed to my videos. Uh links are below to my facebook page and my website, where you can get more information.

All right see you guys on the next one.

Hope you Enjoy the pictures and Video
MORE pictures located HERE!!

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting My Website, come back again soon….

Rick LaFata
(573)-216-0930
rick@customconcretedesign.info
Custom Concrete Design

 

 

 

 

 

 

  

 

So you guys don’t miss any of these videos. We’ll, see you guys on the next project. You

Source : Youtube

Pearl & Graphite Metallic Marble Epoxy Basement Floor Lake Ozark

Okay, guys this week we’re in Lake of the Ozarks down Horseshoe Bend, and we’re gonna be working on this basement floor here, a lot of prep work to do as you can tell I’ll walk Through it, real quick where the carpet strips were, we ‘

Ve got a lot of tack, holes that have to be repaired all around a perimeter, so this whole floor has to be ground down, along with the repairs, quite a few cracks to that. I can see – and probably quite a few that I can’t see until we actually get this forward around.

As you can tell here as well, we’ve got to repair this area all along here, because there was a wall that they took out and we ‘ Ve got a lot of grind in here, a lot of repair work that needs to be done filled in you know there’s about a good half inch lip there and we ‘

Ve got a grind down and try to feather out now there’s, some floor level, or it has to come off there’s, carpet glue that has to come off and some thin set here in the other room which I’ll show you in just second: let’s.

Go in here little bathroom in here, another little room in here. Your crack right here that’s, pretty visible. I’m sure it runs the full length we just can’t quite see all of it until we get some grind and done here, but you can tell all along this perimeter everywhere in every room we’ve got You know fill those little holes and then here, as you can tell and see that lip right there, we ‘

Ve got a grind on it, hit that floor level or off of there, and then you know, fill these areas right here. Bring that all up flush repair, this whole area right through here we’ve, got a foundation. I guess it was poured.

I don ‘ T know how they did this but looks like this is the outside of the foundation and they just poured up to it. So I’m gonna have to throw all that in. I’m going this room here, so they had tiles want to knock up all that thin set there.

It’s pretty thick, but we should be able to knock that down, get it all flat and again we got this repair right along through here that we’ll have to make and get that as level as we can. So we ‘

Ve got a lot of areas that need attention some more than others. The whole floor really needs attention, but there are some areas that that you know have some issues and we’re gonna go ahead and get them fixed up over the course of the next couple of days and get this ready for metallic epoxy.

Ok, we’ve got all of our repairs done and we’re ready for our base coat of epoxy. A big gray patch is one of our big areas that we had to repair. Was it’s very uneven about an inch and a half drop cracks everywhere, holes everywhere around the perimeter? Everything’s patched in couple cracks there in the bathroom prepared and this one large crack here that ran all the way out to the fireplace here like that big trench right there, it’s all filled in all along there.

It’s all packed in leveled, the white patches were posts were patched all those in after we ground the old material out. Let this crack right here was a really large one that went all the way in that wall in this bedroom here.

That’s repaired. You can still see it, but we’re going to cover all this up and you won’t see any of this patchwork over here we had in a couple of spots. We had about a two inch drop, so we really ground that down pretty good ground it back and then we took and filled everything in after we got all the old stuff off got ground down and then seeing it down and another area we had to patch And remember this whole back room had that thin set really thick thin set back here, got all that pulled up.

I had to patch another hole white one there and, of course you know all this level of right here it just rinse. It just runs from one side of the house to the other, so that gray patch, alright our base coat is down.

It is the next day Swiss dry. So I ‘ Ve got a lot of bubbles. You know where the product is it’s, got some air trying to escape and concrete’s. Pretty porous, though, in a lot of areas, some more than others back in here it came out pretty smooth, really don’t.

Have any bubbles speak? Oh there’s just you know some junk that that fell in there just a little bit of debris, but other than that. We’re gonna sand all this down today. So all these little bubbles and all this debris will be sanded down smooth it.

Really it’s, all gonna be after today it’s, gonna be like glass. This is this closet and here actually turned out perfect. There’s; no dirt there’s, no bubbles. I mean that’s, what you hope for pretty much on the entire floor, but that’s in a perfect world, and this was a pretty tough job.

Getting this one prepped up, it had a lot of issues, as you guys seen from the previous video. So right now we’re. Just at that stage to where this is a base coat. We’re gonna sand. It get all these little imperfections out and get it ready for our top coat, which is going to be pearl, and then we’re gonna gain in some graphite.

On top of that, so it’ll, be 75 % pearl, and here’s, a 25 % it’s. Gon na be our black graphite. Bane’s, so we’re gonna marbleize. This thing today, you can see all those bubbles I just hit up in the sander.

It’ll, come out, we’ll clean it up and get going on it, but over here is where we had all that leveling. Where this pole is all the way across, you know, we originally had a two-foot. Our 2 foot 2 inch drop right there and we leveled that down to where it ‘

S just got a slight grade to it. You know it’s, not completely level all the way back to the wall, so it does have a little bit of a grade. I don’t know what the degree of that degree is necessarily, but it’s, not bad to the eye.

You really can’t see it feel it a little bit when you walk on it, but other than that. I mean it’s, it’s tight, it’s smooth. You know on the bubble in the take out, so it’ll, be even smoother here. Those bubbles popping another area that turned out pretty nice right through here, no issues forced bubbles, just a little bit of better than debris.

You know, and again we had this repair that ran. I’m one side of the house to the other right here. It’s gone okay. We got this job over here. Four seasons is complete back bedroom here in the corner.

This was probably the nicest concrete back in here in this room. It started to get rough as we kind of come out here into the living area. This was all pretty nice through here, and it started to get kind of rough as we got right here by the fireplace and of course we had a drop right here.

There’s about a probably an inch or so over. Here we brought it down to about a half inch and put that leveler on there, so that’s, one of our spots, and this is where it goes all the way across the room.

Only across the house there’s, the other spot. There ran here from the fireplace all the way on over check all that leveler out, and that was about a two-inch drop almost of here inch and 3/4, and then we brought it down to about three quarters of an inch.

I never had to level everything else up on this side of that. So we didn’t level. It 100 %. We just kind of created a nice gradual slope, but you can’t really. You can’t really see it. It’s, pretty gradual.

This is one of my favorite spots on the floor here. First bedroom and here’s bathroom. This is pretty good Concord in here. Just had a few cracks. That’s, a major this another spot. I really like right here: it’s, got a lot of cool effects kind of here, and there around the floor all a little a little bit different small lines, large lines, double lines, swirly twirly lines, but that’s.

What makes it unique you know it’s, it’s, all a little bit different here and there. If we don’t want any kind of pattern cool spot. It goes into this back bedroom. A couple really nice areas back here as well, sometimes, but right here all through here – this is another spot for every pair.

If you guys happen to be on YouTube watching this, please subscribe to my channel. That was miss any of my videos in the future. Please, on every job, so get subscribed, hit that red button somewhere here on Facebook or on the YouTube.

If that’s, where you’re watching it and then go over to my facebook page, there’s. Links in the description below below this video, where you can go to my website and check out my Facebook page but yeah, if you guys, like this video, just hit that little like button below and leave me a comment.

Let me know what you think see you guys on the next project:

Please subscribe to My YouTube Channel and uh like the video. If you like it, leave me a comment. Let me know what you think and hit that little bell, so you stay subscribed to my videos. Uh links are below to my facebook page and my website, where you can get more information.

All right see you guys on the next one.

Hope you Enjoy the pictures and Video
MORE pictures located HERE!!

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting My Website, come back again soon….

Rick LaFata
(573)-216-0930
rick@customconcretedesign.info
Custom Concrete Design

 

 

 

 

 

 

  

 
 

Source : Youtube 

Source : Youtube

Decorative Concrete Pillars | Resurfacing Concrete Wall Blocks Lake Ozark

What this week, we’re in Lake of the Ozarks Missouri. This is Rick with Custom Concrete Design. We’re down. Horseshoe been here. We’re gonna be working on this. Well, it’s, two pillars. Just just the driveway pillars am four, but they just want the front ones done here in front of the house.

So we’re gonna. Do both of these already got everything prepped up and ready to go for some concrete, a little patchwork, but we’re gonna do a real light gray on the majority, probably 90 % of it. The other 10 % is gonna, be a little bit darker gray, just on this front facing here this little border.

So already for some concrete, you go ahead and get this stuff on. Ok, we ‘ Ve got the base coat on the two pillars here, so we are ready to go for another base coat tomorrow. I’m gonna spray. That long and then we’re gonna make that trim a little bit dark for tomorrow.

That goes around where I’ve got that taped off right there in the front a little bit darker, I’m gonna spray it on tomorrow. Okay, we just put our third base coat on our third coat of concrete.

I should say that’s, the texture coat, which is a knockdown finish, and we just finished up our third coat on the trim, so the trim is a little bit darker than the rest of it. I put our final coat texture coat on earlier today, and we just put that darker coat on there finished up about 30 minutes ago.

So we’re, just letting it dry still wet. It will lighten up some, not a lot, but it will lighten up some over here. We sprayed this one first and you can SEE WHERE THIS ONE IS lightening up already, because it looks splotchy.

You see the dark spots, you see the light spots so that light area is actually dry right now, but that will darken back down as we seal it. Tomorrow I’m going to come back and seal this thing. This will darken down a few shades too, but it’s.

You know it’s completely dry and then this will. This will actually go back to the darker shade. Once it’s sealed, but it dries quite a bit lighter so anyways, as you can tell you know this one is considerably darker over here, but they turned out pretty nice.

I’m happy with them. Okay, this job is done and put sealers on yesterday to coat the sealer and the clients put the fixtures back on top sometime this morning. I guess that’s, the big light that I was talking about, the chrome band around the perimeter on that top slab, that’s.

Why we left that you know we didn’t code, it so we just wanted to seal. It looks nice and clean now, if you guys are watching this on youtube. Please subscribe to my channel like the video. If you liked it leave me a comment, let me know what you think and we’ll, see you guys on the next job, thanks for watching.

Please subscribe to My YouTube Channel and uh like the video. If you like it, leave me a comment. Let me know what you think and hit that little bell, so you stay subscribed to my videos. Uh links are below to my facebook page and my website, where you can get more information.

All right see you guys on the next one.

Hope you Enjoy the pictures and Video
MORE pictures located HERE!!

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting My Website, come back again soon….

Rick LaFata
(573)-216-0930
rick@customconcretedesign.info
Custom Concrete Design

 

 

 

 

 

 

  

 
 
Source : Youtube

Decorative Concrete How to do Decorative Concrete Resurfacing Acid Stain | Lake Ozark Osage Beach Mo

All right this week, we’re at Mystic Bay condos in Osage Beach Missouri. This is Rick with custom, concrete design at this back deck. We’re gonna start with will open area right here seems to be in pretty good shape.

Few stains and goes into the screened-in porch area. I think we’ve got about five or six cracks that we have to repair there, pretty small hairline cracks, so they’re, not bad. There’s, one of them. We’re, just getting ready to grind, we’ve got everything set up, so we’re, going to go ahead and start grinding.

Okay, we have the texture on, got everything tapered off and we are ready to spray. The antique stain we’re gonna darken this down just a little bit and the sun’s, kind of creating a whole lot of shadows for us, so it’s.

Probably gonna distort this a little bit, but you can see the Tuscan slight texture. A darker base lighter top coat. It ‘ S already got a little bit of marbling going on on our top coat and, of course, you know there’s variation between a the base and top coat that you can already spot so make it look a little bit different here in a minute.

Okay, this job at Mystic Bay is now complete. Yesterday we put our antiquing stain on it and got it cleaned up today and put our sealer on get to coach of the acrylic sealer so that colors just poppin real nice.

Now, looking good nice and shiny and the sun’s, gonna play with us a little bit again shadows kind of make. It look a little different here and there, but it looks good turned out great if you get closer shot of some of this without the sunlight affecting it.

That way, you can kind of get a look at the texture. Remember we had about five or six cracks in this that we had to repair to and, as you can see, they have disappeared and, as always, if you guys are watching this on my youtube channel, please subscribe to my channel if you like the videos that way You won’t, miss anything that I do in the future and if you like, this video hit that little like button down below and also comment.

You know if you guys, like the job or don’t like the job. Just let me know you guys is opinion. I’d, like to like to hear from you as always see you guys on the next project.

Please subscribe to My YouTube Channel and uh like the video. If you like it, leave me a comment. Let me know what you think and hit that little bell, so you stay subscribed to my videos. Uh links are below to my facebook page and my website, where you can get more information.

All right see you guys on the next one.

Hope you Enjoy the pictures and Video
MORE pictures located HERE!!

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting My Website, come back again soon….

Rick LaFata
(573)-216-0930
rick@customconcretedesign.info
Custom Concrete Design

 

 

 

 

 

 

 

Source : Youtube

 Page 1 of 13  1  2  3  4  5 » ...  Last »