google.com, pub-1613111081024165, DIRECT, f08c47fec0942fa0

Decorative Concrete Pillars | Resurfacing Concrete Wall Blocks Lake Ozark

What this week, we’re in Lake of the Ozarks Missouri. This is Rick with Custom Concrete Design. We’re down. Horseshoe been here. We’re gonna be working on this. Well, it’s, two pillars. Just just the driveway pillars am four, but they just want the front ones done here in front of the house.

So we’re gonna. Do both of these already got everything prepped up and ready to go for some concrete, a little patchwork, but we’re gonna do a real light gray on the majority, probably 90 % of it. The other 10 % is gonna, be a little bit darker gray, just on this front facing here this little border.

So already for some concrete, you go ahead and get this stuff on. Ok, we ‘ Ve got the base coat on the two pillars here, so we are ready to go for another base coat tomorrow. I’m gonna spray. That long and then we’re gonna make that trim a little bit dark for tomorrow.

That goes around where I’ve got that taped off right there in the front a little bit darker, I’m gonna spray it on tomorrow. Okay, we just put our third base coat on our third coat of concrete.

I should say that’s, the texture coat, which is a knockdown finish, and we just finished up our third coat on the trim, so the trim is a little bit darker than the rest of it. I put our final coat texture coat on earlier today, and we just put that darker coat on there finished up about 30 minutes ago.

So we’re, just letting it dry still wet. It will lighten up some, not a lot, but it will lighten up some over here. We sprayed this one first and you can SEE WHERE THIS ONE IS lightening up already, because it looks splotchy.

You see the dark spots, you see the light spots so that light area is actually dry right now, but that will darken back down as we seal it. Tomorrow I’m going to come back and seal this thing. This will darken down a few shades too, but it’s.

You know it’s completely dry and then this will. This will actually go back to the darker shade. Once it’s sealed, but it dries quite a bit lighter so anyways, as you can tell you know this one is considerably darker over here, but they turned out pretty nice.

I’m happy with them. Okay, this job is done and put sealers on yesterday to coat the sealer and the clients put the fixtures back on top sometime this morning. I guess that’s, the big light that I was talking about, the chrome band around the perimeter on that top slab, that’s.

Why we left that you know we didn’t code, it so we just wanted to seal. It looks nice and clean now, if you guys are watching this on youtube. Please subscribe to my channel like the video. If you liked it leave me a comment, let me know what you think and we’ll, see you guys on the next job, thanks for watching.

Please subscribe to My YouTube Channel and uh like the video. If you like it, leave me a comment. Let me know what you think and hit that little bell, so you stay subscribed to my videos. Uh links are below to my facebook page and my website, where you can get more information.

All right see you guys on the next one.

Hope you Enjoy the pictures and Video
MORE pictures located HERE!!

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting My Website, come back again soon….

Rick LaFata
(573)-216-0930
rick@customconcretedesign.info
Custom Concrete Design

 

 

 

 

 

 

  

 
 
Source : Youtube

Decorative Concrete Patio Resurface Lake Ozark Condo


Hey guys, it’s, Rick custom, concrete design in Lake of the Ozarks. This week. We’re over at Timberlake village. Again Doing this condo unit on the third floor, add a bunch of carpet on it that we went ahead and removed, But as you can see, what’s left behind is a lot of carpet glue.

So we’re gonna go ahead and get started by grinding all that off, get down to the bare concrete Like out here on this deck. There is one crack out there as you can see what we’re gonna go ahead and repair that, And I think there’s.

One right, here. Probably barely see it. This is a cold joint. We’re gonna go ahead and get that ground out open that back up Other than that. The concrete’s really in solid shape.. So we’re gonna get started Alright here’s, one of the cracks that we just repaired Still a little wet.

That was the last place we stopped because we had to fill some in, but right here. It was dry. So we went ahead and ground that down flush, So that is completely repaired there That one’s already been fixed and ground down it’s, another one.

We found working on this one right here, As you can see up there. It’s still not quite done. That’s, where we’ve stopped, and we still have these two more here, one here and one Right here, So we had more cracks when we thought once we remove that glue, but that’s.

Okay, easily fixable. It’s coming right along now. Okay, we got this job done over here. There’s, our flagstone pattern. All right. We’ve finished up this jab over here at Timberlake villages They ‘

Ve got the furniture back on, so we decided to shoot after the furniture is back on video on this one. Everything’s, looking good, They’ve, got it decorated up real nice filled it up Nice outside space, though, looks good.

If you guys are watching this over on YouTube. There please subscribe to my channel, so you don’t. Miss any of my Up and coming videos on my next jobs. If you liked the video hit that like button and leave me a comment, let me know what you think of this particular pattern and this job and Head on over to my site a lot more information there as well, and the link is below this video.

. So Anyways we’ll, see you guys on the next. You [ Music, ], hey guys it’s, Rick custom, concrete design in Lake of the Ozarks. This week we’re over at Timberlake village. Again doing this condo unit on the third floor, add a bunch of carpet on it that we went ahead and removed, but as you can see, what’s left behind is a lot of carpet glue.

So we’re gonna go ahead and get started by grinding all that off, get down to the bare concrete like out here on this deck. There is one crack out there, as you can see what we’re gonna go ahead and repair that, and I think there’s.

One right here, probably barely see it. This is a cold joint. We’re gonna go ahead and get that ground out open that back up other than that. The concrete’s really in solid shape. So we’re gonna get started alright here’s, one of the cracks that we just repaired still a little wet.

That was the last place we stopped because we had to fill some in, but right here it was dry. So we went ahead and ground that down flush, so that is completely repaired there that one’s already been fixed and ground down it’s, another one.

We found working on this one right here, as you can see up there. It’s still not quite done. That’s, where we’ve stopped, and we still have these two more here, one here and one right here, so we had more cracks when we thought once we remove that glue, but that’s.

Okay, easily fixable. It’s coming right along now. Okay, we got this job done over here. There’s, our flagstone pattern. All right. We’ve finished up this jab over here at Timberlake villages they ‘

Ve got the furniture back on, so we decided to shoot after the furniture is back on video on this one. Everything’s, looking good, they’ve, got it decorated up real nice filled it up nice outside space, though, looks good.

If you guys are watching this over on YouTube. There please subscribe to my channel, so you don’t. Miss any of my up and coming videos on my next jobs. If you liked the video hit that like button and leave me a comment, let me know what you think of this particular pattern and this job and head on over to my site a lot more information there as well, and the link is below this video.

So anyways we ‘ Ll, see you guys on the next. You [ Applause, ],

Please subscribe to My YouTube Channel and uh like the video. If you like it, leave me a comment. Let me know what you think and hit that little bell, so you stay subscribed to my videos. Uh links are below to my facebook page and my website, where you can get more information.

All right see you guys on the next one.

Hope you Enjoy the pictures and Video
MORE pictures located HERE!!

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting My Website, come back again soon….

Rick LaFata
(573)-216-0930
rick@customconcretedesign.info
Custom Concrete Design

 

 

 

 

 

 

 

Source : Youtube

Knockdown Texture – ⚠️WARNING⚠️ Don’t Try This Alone 👷Sprayed Decorative Concrete Flagstone 👷

[, Music ], hey guys it’s, Rick custom, concrete design in Lake of the Ozarks. This week we’re over at Timberlake village. Again doing this condo unit on the third floor. Add a bunch of carpet on it that we went ahead and removed, but as you can see, what’s left behind is a lot of carpet glue.

So we’re gonna go ahead and get started by grinding all that off. Get down to the bare concrete like out here on this deck, there is one crack out there, as you can see what we’re gonna go ahead and repair that, and I think there’s.

One right here probably barely see it. This is a cold joint. We’re gonna go ahead and get that ground out open that back up other than that, the concrete’s really in solid shape. So we’re gonna get started alright here’s, one of the cracks that we just repaired still a little wet.

That was the last place we stopped because we had to fill some in, but right here it was dry. So we went ahead and ground that down flush, so that is completely repaired there that one’s already been fixed and ground down it’s, another one.

We found working on this one right here, as you can see up there. It’s still not quite done. That’s, where we’ve stopped, and we still have these two more here, one here and one right here, so we had more cracks when we thought once we remove that glue, but that’s.

Okay, easily fixable. It’s coming right along now. Alright, we’ve finished up this job over here at Timberlake villages they ‘ Ve got the furniture back on, so we decided to shoot after the furniture is back on video on this one.

Everything’s, looking good, they’ve, got it decorated up real nice filled it up nice outside space, though, looks good. If you guys are watching this over on YouTube. There please subscribe to my channel, so you don’t.

Miss any of my up and coming videos on my next jobs. If you liked the video hit that like button and leave me a comment, let me know what you think of this particular pattern and this job and head on over to my site a lot more information there as well, and the link is below this video.

So anyways we’ll, see you guys on the next [ Applause, ]

Please subscribe to My YouTube Channel and uh like the video. If you like it, leave me a comment. Let me know what you think and hit that little bell, so you stay subscribed to my videos. Uh links are below to my facebook page and my website, where you can get more information.

All right see you guys on the next one.

Hope you Enjoy the pictures and Video
MORE pictures located HERE!!

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting My Website, come back again soon….

Rick LaFata
(573)-216-0930
rick@customconcretedesign.info
Custom Concrete Design

 

 

 

 

 

 

 

Source : Youtube

Decorative Concrete Condo Deck Tuscan Slate Texture Brown Antique Stain | Lake of the Ozarks MO

Okay this week we are in Greenview Missouri by the hurricane deck and Lake of the Ozarks MO, today were gonna start on a condo deck luckily for us its on the ground level and will be on the backside of the complex working on this screened in patio concrete has a few cracks nothing major the complex itself is fairly new so we have some great concrete to work with and another nice view of the lake.

So first step with this concrete is to prep it up meaning open up the cracks grind the surface which opens up the pores of the concrete to get it ready for our overlay. Once the cracks are opened up I’ll go ahead and fill them and then grind them down flush with the rest of the concrete, now the cracks are filled and ground down were just gonna go ahead and grind the rest of it cleaned it up the best we can with a shop vac and then pressure wash it.

The next step is putting down the base coat we are going with a dark chocolate color as our base, that goes down pretty quick so we went ahead and put down a second base coat.

Now were ready for our top coat which is can be a Tuscan Slate texture which will now give this concrete some depth and will create a nice design for the stains in the next step.

Right now we have to prep off the screen and the inside walls with paper, mix up our antique stain pour it into our pump up sprayer and spray this out randomly most likely I will need 2 maybe 3 coats I would say the third coat will be more of a highlight coat where I just kind of spray here and there to get the marbleization that I’m looking for.

Once I have the antique stain applied and the marbleization that I’m looking for I’ll let it dry and move on to the next step will be the next day and will come in and remove the paper get it cleaned up and ready for sealer, so I always come in and put two coats a sealer on the next day this allows the antique stain to fully dry and just give me that look them after. The first coat of sealer usually gets absorbed very quickly, however the second coat is what I like to call the money coat and it really allows the color to pop and gives it a great shine.

I would say that this Brown antique stain along with our Tuscan Slate has to be one of our more popular floors that we do our client was extremely happy with it and it brought in several more bids from those that live in that condo complex, enjoy the video on this post and the rest of the videos on my page under the video gallery tab be sure and check out the picture gallery as well and all the other information on this website.

Hope you Enjoy the pictures and Video
MORE pictures located HERE!!

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting my Website, come back again soon….

Rick LaFata
(573)-216-0930
rick@customconcretedesign.info
Custom Concrete Design

Decorative Concrete Overlay Coating Knockdown Finish on a Pool Deck | Lake Ozark, MO

On this pool decks we started our day by trimming back bushes grinding the walkway and grinding off the concrete overlay on the pool deck.

Once the concrete overlay was completely removed from the pool deck itself we had several cracks that needed repaired so we ground them out and filled them in. We also had one area that was a hole the size of a baseball so we cleaned it out and continued with our repair.

All the grinding and repairs were done we were finally ready to start our overlay on the entire surface started at the far end of the pool and just worked our way back with our base coat, once it was dry we came back through with a second base coat.

Now we have a fresh clean repaired concrete surface to work with, we measured everything out 4 x 4 squares set on a 45° pitch with a 5 inch border around each square and around the pool itself and we measured out a 10 inch border for the outside perimeter of the pool deck, once we had all our measurements done and had our marks down we continued with our fiber tape to lay down the pattern.

Once the pattern was down it was time for more colored concrete, I decided to do the all the borders first so that meant we had to paper off the 4 x 4 squares from any concrete overspray. Now the borders are sprayed and the only thing we could do was let everything dry overnight.

The next step was to paper off the borders so that we could spray the 4 x 4 squares the lighter color of the two colors, basically what we were trying to go for here and you can see from the pictures and the video is keeping everything overall very light with the color of the house and keeping the borders a few shades darker to set off our pattern and to also complement the trim of the house. After the squares were sprayed we pulled the paper off of our borders and then we also removed our fiber tape that separated the square and the border all of this reveals our pattern our colors and now it’s a matter of getting everything cleaned up and getting it sealed.

The whole process from start to finish took us about three weeks to complete, the reason it took a little bit longer on this project is simply because we had a lot of rain mother nature can be relentless sometimes, but the job got done it turned out great our client was very happy.

Hope you Enjoy the pictures and Video
MORE pictures located HERE!!

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting my Website, come back again soon….

Rick LaFata
(573)-216-0930
rick@customconcretedesign.info
Custom Concrete Design


 Page 1 of 12  1  2  3  4  5 » ...  Last »